Installing Ameriglo sights on your Glock 19 is a rather easy and quick process. After removing the old sights, all you need to do is remove the two sets of screws that are on either side of the rear sight. You will then slide the new sights onto the rear slide and then replace the two sets of screws. Make sure to tighten them down securely so that they do not move around and damage the sights. Repeat this process for both sets of sights and you are all set to go!
Cleaning a Glock is pretty simple. You remove the magazine, lock the slide back, and pull the trigger. Now, you remove the barrel by pushing it upwards from the bottom of the gun. Replace the barrel with a cleaning rod and bore snake. Run the bore snake through the barrel a few times and then through a bore snake receptacle. Next, submerge the rod and bore snake in some cleaning solution and run them through and out of the barrel 10-15 times. After that, run some gun oil in and out of the barrel 20-30 times to lube it up. Finally, wipe everything down with a rag or paper towel and you’re done.
I hope this helped you out, if you have any questions feel free to comment below.
There are a few factors to consider when deciding between the Glock 17 and the Glock 19. For one, the Glock 17 is larger and has a higher magazine capacity than the Glock 19. The Glock 17 also has a longer barrel, which can give you a bit more accuracy and power. However, the Glock 19 is smaller and more concealable than the Glock 17, making it a better option for everyday carry. Ultimately, it comes down to personal preference and what you plan on using your handgun for.
